How to use single cap rivets

To use single cap rivets, you'll need the rivet, a setting tool (like a snap setting tool or a rivet setter), and a hard surface like an anvil. First, punch a hole slightly larger than the rivet post. Then, insert the post through the hole and snap the cap onto the post. Place the rivet on the anvil and use the setting tool to press or tap the cap down, securing it.

Detailed Steps:

1. Prepare the Material:
Punch a hole in your material (leather, fabric, etc.) that is slightly larger than the rivet post.

2. Assemble the Rivet:
Insert the rivet post through the hole. Then, snap the cap onto the post, ensuring it's securely attached.

3. Setting the Rivet:

Using a Snaps Setting Tool: Place the rivet on the hard surface, with the cap side up. Use the snap setting tool to press down on the cap, forcing it to mushroom and form a secure hold.
Using a Rivet Setter and Hammer: Place the rivet on the anvil with the cap side up. Use the rivet setter (a tool with a concave end) and a hammer to tap the cap, ensuring it forms a secure, rounded surface.

4. Check the Rivet:
Ensure the rivet is firmly seated and that the cap is flush with the material.

How to use single cap rivets

Detailed Steps:

Related Blogs